Kwikivac
Vacuum Cleaner Supply

Low Prices
Top Quality
Great Service
Home         Bags | Filters | Belts | Brush Rolls | Brands | FAQs         Help | Policies          Search          Cart

Vac Brands
Bissell
Central Vac
Dirt Devil
Electrolux
Eureka
FilterQueen
GE
Hoover
Kenmore
Kirby
Miele
Oreck
Panasonic
Regina
Royal
Samsung
Sanitaire
Sanyo
Sharp
Simplicity
Rainbow
Shop Vac
Dyson
Home > Brands > Eureka > Eureka Belts > Eureka Style R Belt Extended Life 1 Pack (PN 61110)

Eureka Style R Belt Extended Life 1 Pack (PN 61110)

Genuine Eureka Style R extended life belt in a convenient 1 pack. This belt is Eureka part number 61110 and fits Eureka Upright Ultra Smart Vac or Boss Smart Vac Models 4800 Series. Replace your vacuum cleaner's belt after twelve to eighteen months of use.

This item is KwikiVac number KV0970.
$5.89 per pack of 1 belt
KV0970 to your Cart
Click to enlarge
Eureka Style R Belt Extended Life 1 Pack (PN 61110)
Eureka Style R Belt Extended Life 1 Pack (PN 61110)
Fits these models and others:
  • Eureka Omega Upright Model 4870A
  • Eureka Omega Upright Model 4870AV
  • Eureka Omega Upright Model 4870B
  • Eureka Omega Upright Model 4870D
  • Eureka Omega Upright Model 4870DT
  • Eureka Omega Upright Model 4870F
  • Eureka Omega Upright Model 4870G
  • Eureka Omega Upright Model 4872A
  • Eureka Omega Upright Model 4872B
  • Eureka Omega Upright Model 4874A
  • Eureka Omega Upright Model 4874B
  • Eureka Omega Upright Model 4875A
  • Eureka Ultra Smart Vac Cyclonic Model 4880A
  • Eureka Ultra Smart Vac Cyclonic Model 4885A
  • Eureka Ultra Smart Vac Cyclonic Model 4885B
  • Eureka Whirlwind Model 4880B
Why should I replace the belt?

A belt in good condition turns the brush roll more efficiently, thus providing stronger beating and sweeping action and better cleaning of your carpets. Belts age and wear with normal use and should be checked periodically for cracks, cuts or loss of tension.

How do I replace the belt?
  1. Turn off the switch and unplug the electrical cord before replacing the belt
  2. Remove the bottom plate or hood depending on the model (refer to owner's manual)
  3. Lift out brush roll and discard old belt
  4. Place new belt around brush roll pulley and motor pulley or shaft
  5. Seat brush roll into base
  6. Replace and secure hood or bottom plate

KwikiVac Vacuum Cleaner Supply
Copyright © 2003 - 2012 KwikiVac LLC. All rights reserved.
Our Policies    Legal Info    Home
Bags    Filters    Belts    Brush Rolls    Our Brands